background image

0

 

Instruction manual for the BM 

 

Congratulations!
With your new 

 you have purchased an appliance of the latest technical standard. As a quality product, it complies with

all national and European licence regulations.
Your 

 is designed so that you can monitor your baby, without causing it any harm whatsoever. The radio transmission

enables you to move freely around your house or garden within its range.

The use of a 

 cannot replace, but only support personal supervision of a child or person in need of care.

 points out that it does not accept any responsibility whatsoever not covered by legal guarantee regulations.

This applies in particular to this 

 being used for medical purposes for which it is not intended.

Besides performing its basic function, your BM 50 P BabyfonB has the following features:

Pilot signal technology

To prevent interference, the BabyfonB transmitter emits an inaudible, coded signal as soon as it is activated. Only when this
signal is received does the receiver switch itself on, thereby preventing the reception of external radio transmissions.
This makes interference from other baby surveillance systems, for example, impossible.
40 

 2 

transmission channels

Interference by CB transmitters is impossible due to the 40 MHz frequency range used. Even if your neighbour has the same
BabyfonB model, your appliance will be protected from interference by the 

 technology.

Battery status indicator

In order to increase the functional efficiency of the 

 the status of the battery or battery pack is constantly checked

and indicated. Only when the red lamp lights up is functionality no longer guaranteed.

Variable sensitivity

In order to ensure optimal adaptation to your everyday life   surrounding noise, you can determine the switch-on threshold of
the BabyfonB. Depending on your individual requirements, the transmitter can be activated by slight noises or only from a
higher level of noise.

Battery pack charge function

The receiver is equipped with an integrated battery pack charge function for the safe charging of your battery packs.

No electro-smog

Due to the extremely low radiation of max. 

 there is no question of electro-smog from this appliance being a health

hazard for your child according to current scientific knowledge. Nevertheless, we recommend a safety distance of   m between

your baby and the 

 Never place the transmitter in the cot or playpen. The functional efficiency of the BabyfonB is

not affected by the safety distance. Radiation is 

 reduced by the fact that the BabyfonB does not transmit

permanently but only when there is actually a sound in the nursery.

Electra-smog from battery pack/battery operation is prevented by low frequency rays, so there is no danger to your child from
electro-smog caused by the 
In AC adapter operation electromagnetic rays exist as a matter of course. You can reduce these to a level generally
recognised as safe by ensuring that the safety distance of approx.   m between your baby and the BabyfonB is adhered to and

that there is also a distance of at least a further 50cm between your baby and the socket.

Please read the following information carefully to familiarise yourself with all the possibilities provided by your new appliance and
its correct operation.

2. 

 elements

(A) Transmitter

(Al)   DC power supply socket
(A2) 

 control

(A3) Channel selector switch
(A4) Power-on/transmission indicator
(A5) Battery status indicator
(A6) Battery compartment

Summary of Contents for BM 50 P









Reviews: