21
BabyGO • www.babygo.eu
BabyGO
ASSEMBLY INSTRUCTION
Motion | Sportline
FreeMove | GoSafe
3. Place the child car seat on the passenger seat ensuring that it is firmly pressed against the
vehicle seat (fig.22).
4. Sit your child in the car seat with their back against the backrest. Place the seat belt around
your child positioning the lap section of the safety belt under both armrests, then harness
clips until you hear a noticeable “click” (fig.23).
Cleaning and maintenance of the cover
Remove the shoulder belt harness from the metal yoke. From the front of
the car seat, pull the shoulder straps out of the harness slot. Remove the
cover the car seat (fig.24/25).
Important
The cover is a safety feature. Never use the child seat without it. Do not put
your child’s safety at risk by using any other replacement covers, as they
could prevent the child seat from protecting your child as well as the origi-
nal cover should.
Washing instructions
The cover is removable and washable at 30 °C, line dry only. The cradle safety
belts and plastic components can be washed with soft scour and warm wa-
ter. Do not use any chemical scour, bleachers or corrosives.
Machine
wash, cold
Do not
bleach
Dry clean,
any solvent
except
trichloroe-
thylene
Do not
tumble dry
Do not
iron
