Trimmer Guide
To attach the trimmer guide
• Ensure the appliance is switched off.
• Position the grooves on the inner sides of the trimmer guide over the
corresponding notches on either side of the cutting head.
• Slide the trimmer guide downwards over the cutters until it will go no
further.
To adjust the trimmer guide
• The marking on the handle should be aligned with the desired grade
number indicated on the trimmer guide.
Grade 1 - 3mm
Grade 2 - 6mm
Grade 3 - 9mm
Grade 4 - 12mm
Grade 5 - 15mm
• Push the rear of the trimmer guide upwards with your thumb until it
clicks into position, and the marking on the handle is aligned with the
required grade number on the trimmer guide.
• Use the longest setting at first, until you become familiar with the
adjustment. If you want a shorter cut, you can adjust the comb to
a shorter position and go over the hair again until you achieve the
desired length.
To remove the trimmer guide
• Switch the appliance off.
• Push the base of the trimmer guide upwards until it comes away from
the cutting head.
For best performance:
• Use on clean, dry hair that has been combed until tangle-free.
7050AU IB-17/055.indd 5
2/27/17 6:24 PM
