BaByliss 2750U, Manual

spirally distributing over all sections of the barrel.   Take care to avoid 
the hot surface of the barrel touching the scalp, face, eyes and neck.

•  Hold in place for 5-10 seconds depending on the texture and length 

of your hair.

•  To remove the appliance from the hair twist the appliance away.
• Allow the curl to cool before styling.
• Repeat on each hair section.
•  After use, switch off and unplug the appliance.
• Allow to cool before storing away

.

Heat Settings 

If you have delicate, fine, bleached or coloured hair, use the lower heat 
settings. For thicker hair, use the higher heat settings. It is suggested to 
always complete a test on initial use to ensure the correct temperature 
is used on the hair type. Start on the lowest setting and increase the 
temperature until desired result is achieved. 

Below is a guide of the temperature settings: 
0    = OFF
I  = 180°C
II = 210°C

Heat Protection Mat 

This appliance comes with a heat protection mat for use during and 
after styling. During use do not place this appliance on any heat 
sensitive surface, even when using the heat mat provided. After use, 
switch off and unplug the appliance. Immediately wrap the appliance 
in the heat mat provided and allow the appliance to fully cool down 
before storing away. Continue to keep out of the reach of children as it 
will remain hot for several minutes. 

Heat Protective Glove 
IMPORTANT! 

A universal heat protective glove has been supplied to 

help protect the hand from temporary contact with the barrel when 
wrapping the hair around the appliance. Please note the heat protective 
glove is only designed to give initial contact protection. Discomfort will