BaByliss BIG HAIR DUAL AIRSTYLER, Manual

Changing the Attachments

•  To attach a brush head, place it over the body of the appliance and 

slide it down into position.

•  Lock the brush head in place by sliding the switch on top of the 

brush to the locked position.

•  To remove a brush head, ensure the switch on top of the brush head 

is in the open position.

• Gently slide the brush head up and off the unit to remove.

CARE & MAINTENANCE

To help keep your appliance in the best possible condition follow the 
steps below:
•  Do not wrap the lead around the appliance, instead coil the lead 

loosely by the side of the appliance.

• Do not use the appliance at a stretch from the power point.
• Always unplug after use.

Cleaning the Rear Filter

•  Unplug the appliance and let it cool completely before cleaning it.
•  Holding the handle of the appliance firmly, lift the filter open from the 

grooves close to the cord bushing, this will enable the rear filter to 
open.

•  Using a soft brush, clean any hair and other debris from the filter.
•  Replace the rear filter by closing the filter lid shut.

For more information on this appliance visit www.babyliss.co.uk