CLEANING & MAINTENANCE
• Make sure the appliance is in the OFF position before cleaning your epilator.
• Carefully remove the protective cover or the sensitive area cap from the epilation head
and run the cleaning brush between the tweezers after each use (see Fig. 7).
• Regularly disinfect the tweezers head by dipping the tips of the cleaning brush in
alcohol.
• For maximum hygiene, the epilation head can be removed and easily rinsed under
running water. To remove the epilation head, press the button on the back of the
appliance (see Fig. 8).
• If the body of the appliance needs to be cleaned, use a damp cloth with soft detergent.
• Ensure all parts are completely dry before putting them back together and plugging in
the appliance to charge.
• Once dried, carefully place the protective cap on.
CAUTION
• Rinse the foil shaver under running water or in a sink. Do not use hot water. Use only
warm or cold water.
• After wet cleaning, allow the shaver foil to air-dry. Do not dry the foil area. Let the
shaving head air-dry.
• When shaking off excess water, hold the main unit firmly to prevent releasing the head
assembly or dropping the units.
• Do not use a dryer or heater to dry the shaver. This may result in malfunction or damage
to the shaver.
BE CAREFUL NOT TO PUSH ON THE FOILS, THEY ARE DELICATE
AND CAN EASILY BE DAMAGED.
Fig. 7
Fig. 8
