EN
50
Note:
If you lift the appliance while holding the release mechanism pressed in, the Gliss mode remains active.
But for your safety, no pulse is released until the appliance is in full contact with your skin. Ensure that
the contact sensor that forms the contour of the appliance’s applicator surface is perfectly and firmly
pressed against your skin to guarantee operation of the continuous flashes in the Gliss mode. If you break
the contact between the applicator surface and your skin, you have 5 seconds to adjust the appliance to
ensure full contact with the skin while holding the release button pressed in. If, after 5 seconds, contact
is not full, the Gliss mode will deactivate and you will have to let the release button go and press it again
to restart the process.
If you lift the appliance and let go of the release mechanism, the Gliss mode will be deactivated.
The Gliss Mode is suitable for people who already have some experience with and some dexterity using
the appliance. With 36 pulses per minute (at level 1), the Gliss Mode lets you treat larger areas of your
body more safely and more quickly: legs, back, arms, torso, etc. For the sensitive areas and the face, use the
Precision Mode.
Automatic shut-off feature
If the appliance is left for more than 10 minutes, it will automatically shut itself off. The ‘ON/OFF/READY’
indicator light will then be orange. To use the appliance again, the user must press the ‘ ’ button and reset the
appliance to the desired power level.
Cover the area being treated
Pulses must be administered in rows, from one end to the other and proceeding
systematically in successive rows. This method ensures better control of the pulses
and will help you to cover the area in question better while preventing treating a
same patch twice or administering pulses too close to each other in the same area.
Pressure marks left on your skin by the application surface should help you to
correctly align the epilator to administer the next pulse, avoiding the release of two
pulses on the same patch of skin or too much space being left between the patches.
Avoid releasing more than one pulse on the same patch of skin!
Do not treat the same area more than once in one session!
