49
EN
Follow these steps:
1. To activate Glide mode, repeat steps 1 and 6 of chapter 3.3.
“Treatment with Homelight®”. Then correctly place the application
surface of Homelight®
against your skin whilst holding down the
trigger button on the device.
2. Glide Homelight®
over your skin without interruptions, in a
slow, continuous movement, without making any up or down
movements.
N.B.:
• If you remove Homelight®
from your skin whilst holding down the trigger
button, it will stay in Glide mode. However, for your own safety, the
pulsed light will only be released if Homelight®
is in full contact with your
skin. You should ensure that the application surface of Homelight®
is in
full contact with your skin in order to allow it to glide.
• If the application surface of Homelight®
is not in full contact with your
skin, you will have 5 seconds in which to ensure that Homelight®
is in
full contact, whilst holding down the trigger button. If that window of 5
seconds is exceeded and there is still not complete contact with the skin,
Glide mode will be deactivated and then you release the trigger button
and press it again to reactivate Glide mode.
• If you lift up the device and release the trigger, Glide mode will be
deactivated.
Glide mode is suitable for people who already have some experience
and proficiency when using Homelight® . With 36 pulses per minute (at
level 1), Glide mode provides safe and fast treatment of larger areas of
the body (legs, back, arms, torso). For sensitive areas and the face, you
should use Precision mode.
G960E IB 1-2.indd 49
14/07/2016 1:25 PM
Downloaded from www.vandenborre.be
