59
EN
switch Homelight® off and on again by pressing the ON/
OFF button twice.
> If the problem persists, contact BaByliss Customer Services
for your region.
• Make sure that the ON LED indicator is on.
> If the ON LED indicator is on, switch Homelight® off and on
again twice by pressing the ON/OFF button.
> If the problem persists, contact BaByliss Customer Services
for your region.
• The ON/OFF LED indicator is glowing red and flashing
> Turn Homelight® off. Homelight® goes into safety mode
because it has detected overheating or a critical problem
(broken fan, problem with the capacitor, etc.). Let
Homelight® cool down for 15 minutes before turning it on
again.
> If the problem persists, contact BaByliss Customer Services
for your region.
• The ON/OFF LED indicator flashes alternately green and red.
> The adapter used to connect your Homelight® device to
the power socket is not the one supplied or it is broken.
> If the problem persists, contact BaByliss Customer Services
for your region.
• The ON/OFF LED indicator is red.
> The device is now at the end of its service life.
6.2. Customer Services
For further information about Homelight® products, please visit www.
babyliss.com.
If Homelight® is broken, damaged, needs to be repaired or if you need
any kind of assistance, please contact BaByliss Customer Services.
G945-G946E IB 1.indd 59
02/06/2015 11:31 AM
Downloaded from www.vandenborre.be
