background image

USER MAINTENANCE

the appliance may require cleaning due to a buildup of residue from hair products.
• Ensure the unit is switched off, unplugged and cool.
• Using a damp cloth and mild detergent or soap, wipe the appliance.
• Ensure the unit has dried thoroughly before re-using.

CAUTION

never allow the power supply cord to be pulled or twisted. never wrap the cord around 
the unit. damage will occur at the high flex point of entry into the unit, causing it to 
rupture and short circuit. inspect the cord frequently for damage. stop use immediately if 
damage is visible or if unit stops or operates intermittently.

CLEANING & MAINTENANCE

it is very important that you use the cleaning tool included with your 
iron to regularly clean the curl chamber. this will prevent a buildup 
of product to ensure the curls produced are always perfectly formed.
•  Ensure the appliance is switched off, unplugged and cool.
•  Lightly dampen the cleaning tool with warm water and mild detergent or soap.
•  Insert the tool fully into the curl chamber cavity as per the diagrams below.

•  Rotate the tool around the curl chamber to remove any buildup of product.

•  Ensure the appliance has dried thoroughly before re-using.
•  The cleaning tool can be used numerous times; just remove the felt pads, rinse them in 

warm, soapy water and let dry before using again.

STORAGE

When not in use, your appliance is easy to store. allow unit to cool, then simply put back 
in the box, and store out of reach of children in safe, dry location. do not jerk or strain 
cord at plug connections.

NOTICE

this Product is equiPPed With an instant heat circuitry. state-oF-the-art 
technology alloWs the heater to reach the oPerating temPerature in less 
than one minute.
do not leave Product on or Plugged in While not in use. unit Will burn out 
iF PoWer is KePt on For an extended Period oF time. Warranty Will be voided. 
turn unit oFF and unPlug When not in use.

kEEP AwAY FROM wATER

wARNING:  

IF YOU ThINk ThE POwER IS  

OFF whEN ThE SwITCh IS OFF,  

YOU'RE wRONG.

everyone knows that electricity and water are a dangerous 
combination, but did you know that an electrical appliance is still 
electrically live even if the switch is off? if the plug is in, the power 
is on. so when you are not using your appliances, keep them 
unplugged.

ALwAYS UNPLUG SMALL APPLIANCES.

BABNTMC1 IB-12152B.indd   9-10

2/17/14   5:10 PM

Summary of Contents for Nano Titanium MiraCurl BABNTMC1C










Reviews: