background image

Regular charging

 

•  A full charge will take 80 minutes and will supply enough power for 

minimum 70 minutes continuous cordless use. The approximate 
remaining using time is shown on the LED display.

•  

In order to maintain the optimum capacity of the rechargeable 
batteries, the appliance should be recharged for 3 hours every 3 
months approximately.

•  The Super Stubble XTP comes with a quick charge feature. A 5 minute 

charge will provide enough power for approximately 3 minutes use.

•  Charging takes approx. 80 minutes.
•  When the unit is charging the display lights up for a few seconds 

showing the running time remaining. The minutes will flash increase 
until it reaches maximum capacity of 70 minutes.

•  When LED display has less than 5 minutes left, the time symbol 

indication will change to red.

Preparation for Use

Always inspect the super stubble before use to ensure the cutting head 
is free from hair and debris and is running smoothly.

Operation

To switch the Super Stubble XTP on, press the O/I button. The LED will
also show the selected cutting height and approximate usage time 
remaining. After 10 seconds, the blue LED for the usage time remaining 
will be switched off but cutting height LED will be kept illuminated whilst 
the motor runs. When there is approximately 5 minutes left shown on 
the LED display, the time symbol will change colour to red and will 
also start to flash. When the LED displays «00», this indicates that the 
unit needs to be recharged, however it may continue to run for a short 
while after.

Using the comb guide

The comb guide allows you to change the cutting length of your 
trimmer. You’ll need to experiment to find your preferred length, but as 

Summary of Contents for SUPER STUBBLE XTP 7898DU

















Reviews: