BEFORE USING THE CLASS 2 POWER SUPPLY,
READ THESE INSTRUCTIONS CAREFULLY.
Use only with adapter Model No.: C045120-A which is provided.
Rated input voltage: 100-240V ~, 50/60Hz 0.2A
Rated Output: 4.5V DC 1200mA
OPERATION
1. For dry location use only. Do not expose to water.
2. When not in use, unplug unit completely.
3. Unit will become warm during operation.
CAUTION
1. Dry location use only. Do not expose to liquids, vapor, or rain.
2. Ensure jack is plugged into the clipper unit before plugging the adapter into the outlet.
3. Do not operate any appliance that has a damaged output cord or housing.
4. Always unplug the unit before cleaning or when not in use.
5. Be sure voltage is correct before plugging in. For connection to power supply not
in the U.S.A. use an attachment plug adapter of the proper configuration for power
outlet. The included adapter automatically adjusts to the input voltage. DO NOT USE
A VOLTAGE CONVERTER.
Clipper CHARGING PRECAUTIONS
• Avoid charging the battery at temperatures below 41° F (5° C) or above 95° F (35° C).
• Avoid charging the battery in direct sunlight or near a radiating heat source.
• Even though the clipper may not be used for an extended period, charge once a month
to preserve battery life.
• The power cord cannot be replaced. If it is damaged, the AC adapter should be
discarded.
Clipper OPERATING PRECAUTIONS
• This clipper has a built-in rechargeable battery. Do not throw into fire, apply heat, or
charge, use, or leave in a high-temperature environment.
