FOR DIRECT PLUG-IN OPERATION
Make sure clipper is off. Connect charging jack into the receptacle at the end of clipper
and plug the adapter into power outlet.
VERY IMPORTANT: Blades must be cleaned and oiled on a regular basis for
proper functioning. Failure to regularly clean and oil the blades will void the
warranty.
USER MAINTENANCE INSTRUCTIONS
MAINTENANCE OF THE BLADE
Always apply oil to the blades before and after use. This will ensure maximum cutting
performance and proper maintenance. Hold the clipper away from your body in a
downward position, and apply a drop of BaBylissPRO
®
lubricating oil
on the front and sides of the cutter blade. Wipe off excess oil with a
soft, dry cloth.
Do not pull, twist, or wrap the supply cord around the appliance.
HOW TO USE COMB ATTACHMENTS
Slide the taper control up or down to adjust the moving blade to the
desired height. The blade is adjustable in five (5) stages from 0.8 mm
to 2.0 mm. The actual cut length may be longer than the set length.
Using the Cutting Guide
1. Select the desired comb attachment.
Trimming height is indicated on the
outside and sides of the guides.
2. Set the taper control to 0.8 and
then mount the guide to
the clipper.
3. To attach the guide, do not press
on the tab. You must press over
the number as shown. The tab is
only for guide removal.
Soulever
ici pour
retirer.
Press here to attach.
