BaBylissPro ItaliaBRAVA BAB5620U, Manual

discontinue  use  immediately  and  contact  the  Conair 

Customer Care Line (refer to ‘UK After Sales Service’ 

section).

•  Do not use the appliance if the lead is damaged. In the 

event of lead damage, discontinue use immediately 

and  contact  the  Conair  Customer  Care  Line  (refer  to 

‘UK After Sales Service’ section).

•  Do not leave the appliance unattended when switched 

on or plugged in.

•  This unit is equipped with a safety thermostat.  In 

the event of overheating the appliance will either 

stop automatically or run hot and cold intermittently.  

Should this happen, switch the dryer to the ‘0’ position, 

unplug and allow to cool for 10 minutes.  Before use, 

ensure the rear filter is clear of hair and other debris.  

Plug in and switch on.  If the appliance continues to 

overheat discontinue use immediately, switch off and 

unplug,  and  contact  the  Conair  Customer  Care  Line 

(refer  to  ‘UK  After  Sales  Service’  section  for  further 

information).

•  Take  care  that  the  air  vents  do  not  become  blocked 

when in use. Make sure the rear filter is clear of hair 

and other debris before use.

•  Do  not  place  the  appliance  on  any  heat  sensitive 

surface whilst in operation.

•  Take  care  to  avoid  the  hot  surface  of  the  appliance 

coming into direct contact with the skin, in particular 

the ears, eyes, face and neck.

•  This  appliance  should  not  be  used  by  adults  whose 

reduced physical, sensory or mental capabilities, or