BEFORE USING THE CLASS 2
POWER SUPPLY,
READ THESE INSTRUCTIONS
CAREFULLY.
Use only with adapter Model No.:
C045120-A which is provided.
Rated input voltage: 100-240V ~, 50/60Hz
0.2A
Rated Output: 4.5V DC 1200mA
OPERATION
1. For dry location use only. Do not expose
to water.
2. When not in use, unplug unit completely.
3. Unit will become warm during operation.
CAUTION
1. Dry location use only. Do not expose to
liquids, vapor, or rain.
2. Ensure jack is plugged into the clipper
unit before plugging the adapter into the
outlet.
3. Do not operate any appliance that has a
damaged output cord or housing.
4. Always unplug the unit before cleaning or
when not in use.
5. Be sure voltage is correct before plugging
in. For connection to power supply not
in Australia. use an attachment plug
adapter of the proper configuration for
power outlet. The included adapter
automatically adjusts to the input voltage.
DO NOT USE A VOLTAGE CONVERTER.
CLIPPER CHARGING PRECAUTIONS
•
Avoid charging the battery at
temperatures below 5°C or above 35°C.
•
Avoid charging the battery in direct
sunlight or near a radiating heat source.
• Even though the clipper may not be used
for an extended period, charge once a
month to preserve battery life.
• The power cord cannot be replaced. If
it is damaged, the AC adapter should be
discarded.
CLIPPER OPERATING PRECAUTIONS
• This clipper has a built-in rechargeable
battery. Do not throw into fire, apply
heat, or charge, use, or leave in a high-
temperature environment.
6
7
B870RGA PRODUCT FEATURES
1. 8 comb attachments.
2. Carbon stainless steel blade.
3. Speed setting: 6300 rpm.
4. Power adapter:
Model No.: C045120-A
Input: 100-240V ~ 50/60 Hz
Output: 4.5V 1200 mA
5. LED charge indicator light
a. LED BLUE Blinking - Charging
b. LED BLUE - Fully Charged
c. LED BLUE Flashing - 10 minutes battery left
6. Discharge time: 120 minutes.
Taper Control
FX801R
Adapter
ON/OFF Switch (ON marked
"", OFF marked " ")
Cleaning
Brush
Lubricating
Oil
Screwdriver
