Lubrication
1. Apply a few drops of the oil to the space between the fixed
comb blade and moving cutter blade. Apply the oil to the clip‑
per before and after each use.
2. Set the taper control to 2.0mm and then remount the blade on
the clipper.
12
VERY IMPORTANT
Blades must be cleaned and oiled on a regular basis so they
will function properly. Failure to regularly clean and oil the
blades will void the warranty.
About the Lithium-Polymer Battery Pack
To ensure that the new battery reaches its full potential, the
battery should be drained to rapid flashing red LED after the first
use. This operation will only have to be performed once. The unit
should then be fully charged until blue LED appears.
The full potential of the battery will be reached after the clipper is
plugged into the charger or power supply cord approximately 5
to 10 times, even if not fully drained.
Summary of Contents for Volare X2 FX811U
Page 1: ...Cord Cordless Auto Voltage Professional Hair Clipper Model FX811U FXB811U BC...
Page 15: ......
Page 16: ......