Head Rest straps should be over the
top of the Restraint and through top slots.
21
For Baby & Child Use
ACCESSORIES & FEATURES
ACCESSORIES & FEATURES
The following instructions apply to accessories that may be supplied with this restraint at point of purchase. If
not, a variety of accessories are available from various retailers of Babylove. In the case of a small baby,
accessories are available to improve the installed position of the baby in the restraint.
WARNING
NEVER USE ANY SEAT COVERS OR ACCESSORIES THAT CAUSE THE SHOULDER HARNESS STRAPS TO
WIDEN SIDEWAYS WHEN FITTED, AS THE HARNESS WILL NOT RESTRAIN THE CHILD CORRECTLY.
PADDED INSERT
(Where fitted)
The Padded Insert is designed to snugly support the baby for
extra comfort. Fit padded insert between Harness straps and
restraint as shown, ensuring insert is lined up or below
shoulder straps.
CROTCH PAD
(Where fitted)
The Crotch Pad is designed to provide extra comfort for baby
or child and is fitted to the restraint as follows:
Feed Crotch Buckle through the slot in crotch pad as shown.
HEAD REST
(Where fitted)
The Head Rest is designed to snugly support the baby or child
for extra comfort. Do not use the Head Rest and Padded Insert
together if they create discomfort.
If fitting Head Rest for baby or child use, fit elastic ties through
Upper Shoulder Strap Slots, over the top of the restraint and
hook onto top headrest clips. Slide Head Rest up or down to
Padded Insert
Crotch Pad
SHOULDER PADS
(Where fitted)
Shoulder Pads are designed to provide extra comfort for baby
or child and are easily fitted to the shoulder harness straps by:
A. At the rear of restraint remove harness shoulder straps
from metal strap connector by slipping straps through open
slot as shown right.
B. Pull the shoulder straps through slots & feed through
shoulder pads.
C. Refit the shoulder strap through the restraint slot & re-attach to
metal strap connector by following the instructions on page 7.
Metal Strap
Connector
Shoulder Pads
Head Rest
