D6.
Cut the ingredients into small cubes measuring approx. 0.6 inch cubes (15 mm X 15 mm) and place them in the
cooking baskets.
- Ingredients can be separated by type (vegetables/meat), or cooking time. For example, place potatoes, which
require a relatively long cooking time in the bottom basket, and zucchini, which cook more quickly, in the upper
basket, which you will add during the cooking cycle.
- Place no more than 14 oz. (400 g) of food in each basket.
- Thanks to the removable trays, you can adjust the capacity according to need: one small basket
(a)
, two baskets
(b)
,
or one large basket
(c)
by removing the tray for the upper basket
Once the baskets are in place, place the lid on top.
D7.
Turn on using the On
(I)
/ Off
(O)
switch on the back of the blender. The LCD screen on the front of the Nutribaby lights up.
D8.
Press the “Mode” button one or more times to choose the desired function. Select the “steam cooking” icon
.
D9.
Select the desired cooking time using the + and - buttons. The time will depend on the type and amount of food
you wish to cook. Refer to the cooking-time table.
D10.
Press OK to start cooking.
D11.
At the end of the cycle, an alarm will sound to inform you that cooking is complete. Press OK to turn off the
alarm. If you wish to continue cooking, press + or – to add minutes, then press OK to start.
D12.
Use the handle to remove the lid. Take care not to burn yourself.
D13.
Use the handles to remove the steam baskets.
D14.
You can also cook eggs. Place the eggs in the egg supports built into the trays.
Note:
is it normal for steam to come out of the vents during operation.
NUTRIBABY
• Instruction manual
18
E. DEFROSTING
Proceed in the same way, choosing the “defrosting” icon
.
COOKING TIMES see page 15
Cooking times are based on cooking in the bottom basket. These times may vary according to the size of the pieces
of food, their quantity, the amount of empty space left in the basket, and the initial temperature of the food. You must
increase the cooking time if you use the second cooking basket.
To cook ingredients requiring different cooking times, place the foods that need to cook the longest in the bottom
basket. During cooking, add the second basket with the foods requiring a shorter cooking time.
F. BLENDING
F1.
Once your ingredients are cooked, open the lid of the cooking bowl and let the food cool for a few minutes.
F2.
Transfer the cooked food to the mixing bowl, using the spatula provided. For best results, do not blend more than
14 oz. (400 g) of cooked fruit or vegetables, or a total of 10.5 oz. (300 g) of meat/vegetables at one time.
F3.
Hold the receptacle using the side opposite the spatula, which you will use as a pincer.
F4.
Pour the cooking juices into the mixing bowl, dosing them according to the desired texture. Do not add more than
6.7 fl oz. (200 ml) of cooking juices.
F5.
Place the lid on the mixing bowl and lock.
F6.
Lock the mixing bowl onto the base. For your safety, the Nutribaby will not operate if the bowl is not locked on the base.
F7.
Use the mode button to select the “blend” function on the screen
.
F8.
Blend the preparation, pressing on the button for 5 seconds, then waiting 5 seconds, then blending again for 5
seconds. Do not blend for more than 30 seconds to prevent overheating. Repeat this operation up to three times.
We recommend you then allow the Nutribaby to cool for 30 minutes prior to blending again.
Removing food from sides of the bowl: occasionally food will stick to the sides of the bowl as you process. Stop the
machine to clear food away. After the blade has stopped moving, remove the bowl lid and use the spatula to scrape
the food from the sides of the bowl back into the center. Do not put hands into bowl unless unit is unplugged.
G. ALARMS
- An alarm will sound if, during the cooking cycle, the Nutribaby tank runs out of water: remove the steamer baskets
and add water. Press OK to shut off the alarm, ensuring you reconnect the cooker to the blender, and restart the
heating cycle to finish cooking.
- An alarm will sound if, during the cooking cycle, the blender and the cooker are not correctly connected: Press OK
to shut off the alarm, reconnect the blender and cooker and restart the cooking cycle.
- An alarm will sound at the end of the cycle to notify you that cooking is complete.
A001111-Nutribaby-Notice_Mise en page 1 31/07/15 10:30 Page18
