7
This product requires very little maintenance.
CLEANING AND MAINTENANCE MUST BE DONE SOLELY BY AN ADULT.
• The high chair has a resistant fabric cover which is completely removable and washable.
• To remove or replace the seat
(A)
cover, follow the instructions in the ‘USE’ paragraph.
• Caring for the seat
(A)
and reducer
(G)
fabric: machine washable at 30 °C, maximum 600 RPM spin.
Ensure you remove the
foam underneath the reducer (G) before machine washing.
For added comfort, we recommend ironing the seat
(A)
fabric:
- fry iron below 90 °C: ensure you add a cloth between the seat fabric and the iron.
- Steam iron over 100 °C: ensure you add a cloth between the seat fabric and the iron.
• Clean plastic parts regularly with a damp cloth. Do not use solvents or other similar products.
• Protect the product from weather, water, rain or snow.
• Excessive exposure to the sun or heat may discover parts.
EInaj
MAINTENANCE AND CLEANING INSTRUCTIONS
5. Removable reducer (G)
The reducer can be removed from the seat
(A)
for machine washing, or can be removed when the product is being used as a
high chair.
There is foam
(N)
in a pouch underneath the insert. Ensure you remove this foam
(N)
before putting the insert in the washing
machine to avoid damaging it.
To put the reducer back in place, reposition the foam
(N)
in the pouch located at the back of the reducer, then insert the harness
and the crotch post into the slots provided.
6. Tilting the seat (L)
To tilt the seat, pull the handle
(L)
located on the back of the seat
(A)
and tip the seat
(A)
backwards into the desired position.
The seat backrest can be tilted into 3 positions, including one in bouncer mode for newborns weighing up to 9 kg using the insert.
7. Height adjustment (F)
Simultaneously press the 2 buttons
(F)
located on each side of the seat to raise or lower the seat
(A)
. There are 5 height
adjustment positions.
8. Fastening and unfastening the harness (K)
To unfasten the harness
(K)
, press the central button
(K5)
.
To fasten the harness
(K)
, insert the buckle
(K1)
located at the hips into the buckle
(K2)
on the shoulder strap. Repeat on the other
side with buckles
(K3)
and
(K4)
. Then insert the two shaped buckles on each side of the central buckle
(K5)
.
9. Opening/closing the tray (E)
To open or close the tray, press the buttons
(J)
located on each side of the seat
(A)
then pull or push the tray. The tray
(E)
can
be opened or closed from either side.
To completely remove the tray, press the buttons
(J)
and pull the tray towards you on one side and then the other.
10. Removing the crotch post (M)
To remove the crotch post, unscrew the two screws located underneath the seat
(A)
cover at the crotch post
(M)
using a cross-tip
screwdriver. Retain the screws so you can put the crotch post
(M)
back in place for a smaller child.
11. Adjusting the footrest (H)
Adjust the height of the footrest
(H)
depending on the size of the child. Simultaneously press the two buttons
(I)
located on each
side of the footrest, then raise or lower the footrest
(H)
to the desired height.
12.
Remove the cover
by unfastening the press-studs located on each side of the seat armrests
(A)
and removing the Velcro strips
located underneath the seat
(A)
as well as the one attached to the frame (located underneath the cover). Then pull the cover
upwards carefully to avoid damaging it. To make it easier to remove the cover, pull the seat tilt button
(L)
upwards.
To put the cover back
, carefully position it on the seat so as not to damage it. To make it easier to put the cover on, pull the
seat tilt button
(L)
upwards then slip on the cover. Finally, attach the cover using the press-studs located on each side of the
seat armrests
(A)
and the Velcro strips located underneath the seat
(A)
of the high chair. Also ensure that the Velcro strip (located
underneath the cover) is attached to the metal frame.
13. Dismantling the product for storage
To dismantle the product, the seat
(A)
must first be separated from the frame
(B)
. To do so, place the high chair in its highest
position, then use a thin screwdriver to press in the 2 slots located on each side of the frame
(B)
and pull the seat
(A)
upwards.
To completely remove the seat, use the height adjustment buttons
(F)
.
Finally, completely remove the tray
(E)
as well as the legs
(C & D)
by pushing the button located at the top of each leg.
USE
SLICK ∙ SLICK
Navy
•
Instructions for use
