19
18
6
1
.
Open the harness buckle and remove the shoulder pad, the buckle
pad, headrest and new born cushion in the oedre figures shown.
2
.
Flip your head against the cloth cover and remove the head cover
from the side.
3
.
Pull out the point of the back cover, pull out the back cover from the
gap between the back and the outer cover, and pull out the cover on all
four sides of the back to remove the back cover.
16. Instructions for use
Thanks for that buying
Babymore
car seat.
The illustrations used in this manual are intended to illustrate the
operation method and structure of the product. When there is a small
difference between the physical object and the figure, the actual product
shall prevail.
In order to improve the quality of the product, we may change the
structure and appearance of the product without notice. Please
understand.
It is important to use an original seat cover only since the cover is an
essential part of the function. You may obtain spare covers at your retailer.
Product Care
To guarantee that your car seat provides the maximum protection, it is
essential to comply with the following points:
• All major components of the car seat must be regularly checked for
damage. The mechanical parts must work without problems.
• Make sure that the car seat is not jammed between hard parts such as
the car door, seat rails etc., which can damage it.
• Avoid getting any dirt or sand in between the upper seat shell and the
base. This can have a negative impact on the performance of the rotation
and recline function. Should this happen the dirt should be removed
before rotating and reclining the seat any further to avoid any permanent
damage of the seat.
Buckle
Food, juice or other residues may accumulate in the buckle, please wash
with warm water.
When the function is normal, you can hear the “click” sound.
Seat belt and plastic parts
Wipe clean with warm water and mild soap.
5
