23
24
5.0
Features
5.0
Features
5.4 Use of the Safety Seat with the Base
• To attach the Safety Seat to the Base,
align the Safety seat with the Base
and push down until the Safety Seat
latches onto the Base. Check that both
sides of the Safety Seat are securely
attached to the base. Rotate handle to
Rebound Position (Fig. 23-1).
Approved in vehicle
handle use positions
• Baby Trend® Recommends using the
tested and approved positions in the
diagram below (Fig. 23-2).
Fig. 23-1
Fig. 23-2
Rebound
Position
Rebound Position
(Recommended)
Carry
Non - Rocking
Car Seat Removal from Base or Stroller
1- Rotate Carry Handle to the carry position.
2- Locate the red release handle behind the head.
end of the car seat. Squeeze the handle to engage
the base release (Fig. 24-1).
3- Lift Car Seat by the Carry Handle and Base Release handle
simultaneously.
Do Not
lift by front of car seat.
Fig. 24-1
(1)
(2)
(3)
(3)
Summary of Contents for CS79C59A
Page 34: ...65 66...
