21
22
ASSEMBLY
ASSEMBLY
Copyright © 2022, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados.
Copyright © 2022, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados.
TO FOLD HIGH CHAIR
WARNING:
Do not
Do not
sit on the frame when the
sit on the frame when the
seat is not attached. Do not
seat is not attached. Do not
use frame as a foot stool.
use frame as a foot stool.
Potential pinch point when
Potential pinch point when
opening the frame.
opening the frame.
The High Chair may be folded with the seat in any
of the height positions.
18)
• Use the recline handle to place
the Seat Back in the most upright
position illustrated in (Fig. 18).
19)
• Pull upward on the release levers
(located on the sides of the frame)
and push the rear legs in the
direction of the front legs until
folded (Fig. 19). Chair is now ready
to put away.
DO NOT
allow your
child to play around a folded high
chair as it may fall.
TRAY STORAGE OPTION
20)
• Squeeze the tray release handle
and slide the tray out (Fig. 20).
Fig. 19
Fig. 18
Fig. 21
Tray Release located underneath tray
Fig. 20
Fig. 22
With Insert
DO NOT place
fingers here.
21)
•Hang the tray on the hooks located
on the back of the rear leg (Fig. 21).
TO UNFOLD HIGH CHAIR
Extend the front and rear legs
outward until locked into position.
TO REATTACH SEAT PAD
NOTE:
Certain High Chair models are
packaged with the High Chair Seat
Pad and Seat Insert already attached
to the Seat Back.
22)
• Thread non-buckle end of Harness
Straps called Harness Attachment
Tabs through the provided slots
in the Seat Fabric, Seat Insert,
Seat Back, and Seat Base (Fig. 22).
When Harness Attachment Tabs are
through the provided slots, rotate
the Harness Attachment Tabs 90
degrees. Make sure that the straps
are firmly in place.
23)
• Revert to step 8 and follow steps
(Fig. 8b to Fig. 8d).
