7
8
ASSEMBLY
ASSEMBLY
Copyright © 2022, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados.
Copyright © 2022, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados.
IMPORTANT!
To ensure safe operation
To ensure safe operation
of your product, please follow these instructions
of your product, please follow these instructions
carefully. Please keep these instructions for
carefully. Please keep these instructions for
future reference.
future reference.
IMPORTANT!
Before assembly and each
Before assembly and each
use, inspect this product for damaged hardware,
use, inspect this product for damaged hardware,
loose joints, missing parts or sharp edges. NEVER
loose joints, missing parts or sharp edges. NEVER
use if any parts are missing or broken.
use if any parts are missing or broken.
IMPORTANT!
Adult assembly is required.
Adult assembly is required.
IMPORTANT!
Always check that the high
Always check that the high
chair is locked in the open position before using.
chair is locked in the open position before using.
TO ASSEMBLE YOUTH SEAT
1)
• Locate the Height Brackets,
Upper frames, front legs and
rear legs (Fig. 1).
Fig. 1
2)
• Insert the left and right
sides’ Height bracket into
the front tube of the Upper
Frame Assembly as shown in
(Fig. 2a).
NOTE: The front tube is
easily distinguished from
the rear tube by the array
of holes located on the
backside of the front tube.
• Squeeze the Release
Handles on both sides
simultaneously and push
the tube through the Height
Adjusters until it locks in the
highest position (Fig. 2b).
3)
• Insert the Legs into the ends
of the front tube of both the
right and left Upper Frame
Assemblies (Fig. 3a).
NOTE
: Legs are properly
connected when the lock
buttons are lined up with
the holes on the ends of the
Upper Frame Assemblies.
Make sure the lock buttons
are engaged before use.
Fig. 2a
Fig. 2b
Upper Frame
Assembly
Upper Frame
Assembly
Height
Bracket
Release Handle
Fig. 3
Lock Buttons
