17
18
ASSEMBLY
ASSEMBLY
Copyright © 2023, Baby Trend Inc., All Rights Reserved. Tous droits réservés.
Copyright © 2023, Baby Trend Inc., All Rights Reserved. Tous droits réservés.
10)
• To attach the Tray, squeeze the
release handle located underneath
the tray and firmly press into the
positioning slots (Fig. 10a).
• The Tray has a 4-position
adjustment. To adjust the position,
squeeze the Tray’s release handle
located underneath the tray and
reposition the tray to the desired
position (Fig. 10b). Release the
Tray’s handle. Check that the Tray is
securely locked in its new position.
TO ATTACH TRAY
WARNING:
Always check that the high chair is
Always check that the high chair is
locked in the open position before using.
locked in the open position before using.
WARNING:
The tray is not designed to hold
The tray is not designed to hold
the child in the chair. The child should be secured in
the child in the chair. The child should be secured in
the high chair at all times by the 5-point restraining
the high chair at all times by the 5-point restraining
system, either in the reclining, semi-reclining or upright
system, either in the reclining, semi-reclining or upright
position. Stay near and watch child during use. Never
position. Stay near and watch child during use. Never
leave child unattended.
leave child unattended.
Fig. 10a
Fig. 10b
Tray Release located underneath tray
4-position
TO ATTACH TRAY INSERT
11)
• The dishwasher safe food Tray Insert snaps onto the High Chair Tray
and is held in place by tabs on the sides of the Tray. When installing
the Tray Insert make sure that it snaps into place to prevent the child
from removing the Tray Insert. To remove Insert, unsnap the tabs
from the Tray (Fig. 11a).
• The Tray may be stored on the back legs of the High Chair. Align the
holes in the rear of the tray with the small pegs on the back legs
(Fig. 11b).
NOTE:
To remove, lift the tray.
Tray Rear
Fig. 11b
Fig. 11a
