background image

51

52

7.0

INSTALLATION

7.0 

INSTALLATION

1. 

Safety Seat with Base: 

 Make sure the 

vehicle is parked on level ground.  Lock 

the Safety Seat onto the Base and check 

that the Safety Seat is level side to side 

on the vehicle seat (Fig. 51-1).  Check the 

Seat Angle Indicator that matches the 

weight of your child.
• If the Seat Angle Indicator shows the 

bubble centered between the lines, the 

seat is installed at the proper level of 

recline for occupants 4-22 lb. (Fig 51-2).

• If the Seat Angle Indicator shows the 

level line parallel with the ground, the 

seat is installed at the proper level of 

recline for occupants greater than 22 lb. 

to 35 lb. (Fig 51-3).

• If the Seat Angle Indicator bubble level 

(4-22 lb.) is not centered or  

level line (23-35 lb.) is not parallel with 

the ground, extend the elevation foot, 

See section 7.5 To Deploy Elevation 

Foot,

 under the front of the base at the 

foot end to achieve the correct position  

(Fig. 51-4). If the correct elevation 

can not be achieved see section 7.5 

Elevation Aids. Re-tighten the vehicle 

seat belt as instructed in section, 

securing the Safety Seat or Base in  

the Vehicle.

Fig. 51-1

Fig. 51-3

Fig. 51-4

 

2. 

Safety Seat without Base:

 

Check that the Safety Seat is 

level side to side on the vehicle 

seat. Check the Seat Angle 

Indicator that matches the 

weight of your child (Fig. 52-1).

Fig. 52-1

Fig. 52-2

Fig. 52-3

• If the Seat Angle Indicator line is not level, the Safety 

Seat is either 

too upright

 or 

too reclined

. If the Safety  

Seat is too reclined adjust the Safety Seat as shown in 

(Fig. 52-2), until the level indicator shows 

level

. If the 

Safety Seat is too upright, place a tightly rolled towel, or 

pool noodle, under the foot end of the Safety Seat until 

the level indicator shows level (Fig. 52-3). Re-tighten the 

vehicle seat belt as instructed in section 

Securing the 

Safety Seat or Base in the Vehicle.

Fig. 51-2

Seat Angle 

Indicator

Center

Parallel

To Ground Line

Summary of Contents for EZ-Lift 35 PLUS



































Reviews: