background image

7

8

3.0

SAFETY

3.0 

SAFETY

3.5 About this Safety Seat

•  This Safety Seat is constructed of plastic that can deform over 

time if left with any object in the seat while stored. 

DO NOT

 

leave heavy objects in the seat while not in use. 

DO NOT

 store 

the seat in the trunk of your car with heavy objects on it or with 

pressure on the seat from the trunk lid.

•  

Replace the Safety Seat and Base after an accident of 

any kind.

  An accident, even a minor accident, can cause 

undetectable damage to the Safety Seat or Base that may 

cause the Seat or Base to fail in a subsequent accident. 

DO 

NOT

 

use the safety seat if it is damaged or broken

.

•  Discontinue use of the Safety Seat and Base after seven (7). 

years from the date of manufacture. The date of manufacture 

can be found on the label located on the underside of the 

Safety Seat or Base. When discarding an out of date seat, 

please ensure that someone finding the seat will be unable to 

use it. We suggest that you disable the seat by removing the 

pad and harness and discarding the pieces at different times.

3.6 About use as a carrier

Never Leave Your Child Unattended, even if they are asleep

Very often when you arrive at your destination you will find 

that your child has fallen asleep in the Seat. Do not leave the 

child unattended, even for a minute. Your child can tip or move 

the carrier by their movements, kicking or grabbing on to their 

surroundings. If the carrier tips over, your child can suffocate 

3.3 About Active Air Bags

NEVER PLACE THIS SAFETY SEAT IN A VEHICLE SEATING 

LOCATION THAT HAS AN ACTIVE AIR BAG.

 If an Active Air 

bag inflates, it can hit the safety seat with great force and cause 

death or serious injury to your child. Refer to your vehicle owner’s 

manual for additional information and warnings about Active Air 

bags, and supplemental restraints, and their proper use with 

Safety Seats.

3.4 About an unoccupied Safety Seat

•  

Never leave the Safety Seat or Base unsecured in your 

vehicle

. An unsecured seat or base can fly through the vehicle 

in the event of a crash, sudden stop or sharp turn and cause 

serious injury to the driver, who may then loose control of the 

vehicle, or to passengers. When not in use, either remove the 

seat and or base from the vehicle or make sure that both are 

securely belted to the vehicle according to these instructions.

•  The Safety Seat may become 

very hot

 if left in direct sunlight. 

Your child may suffer burns from hot plastic components. 

Always check the seat for hot surfaces that may come into 

contact with your child before placing your child in the seat. 

We suggest that you cover the seat with a blanket or towel if 

it will be subject to direct sunlight while you are away from the 

vehicle.

Summary of Contents for EZ-Lift 35 PLUS



































Reviews: