13
14
OPERATION
OPERATION
Copyright © 2020, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados. Tous droits réservés.
Copyright © 2020, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados. Tous droits réservés.
TODDLER SEAT ASSEMBLY
ATTENTION:
Recommended age for Toddler Seat use is
2-4 years of age.
Always assist your child into and out of the
seat.
Before using the toddler seat, remove tray
(step 16), lock wheels (step 18), before
using toddler seat.
21)
• Completely remove the harness and
buckle from the product by threading
the strap ends through the seat back
(Fig. 21a).
• Remove extension tubes from the
front and rear legs by pushing the
locking pins in and pulling tubes (Fig.
21b).
• Reassemble the Front and Rear
Legs by inserting the tube ends into
the Upper Frame Assemblies (Fig.
21c).
NOTE:
Legs are properly connected
when the locking pins are lined up
with the holes on the ends of the
Upper Frame Assemblies. Make sure
the locking pins are engaged before
use.
Fig. 21b
Fig. 21a
Fig. 21c
TO REATTACH SEAT PAD
NOTE:
Certain High Chair models are
packaged with the High Chair Seat Pad and
Seat Insert already attached to the Seat Back.
22)
• Thread non-buckle end of Harness
Straps called Harness Attachment
Tabs through the provided slots in
the Seat Fabric, Seat Insert, Seat
Back, and Seat Base (Fig. 22). When
Harness Attachment Tabs are through
the provided slots, rotate the Harness
Attachment Tabs 90 degrees. Make sure
that the straps are firmly in place.
23)
• Loop the flap on the back of the pad
over the top of the Seat Back. Connect
the Seat Pad to the Seat Back with the
two Elastic Loops. These fit over the
Attachment Tabs located near the top
harness slots (Fig. 23).
24)
• Attach the bottom of Seat Pad to the
Seat Base with the two Elastic loops
located at the rear of the bottom of the
Seat Pad. These fit over the Attachment
Tabs located on the Seat Base near
where the Seat Back and Seat Base
Join (Fig. 24a).
Fig. 22
Fig. 23
Fig. 24a
