27
28
ASSEMBLY
ASSEMBLY
Copyright © 2022, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados.
Copyright © 2022, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados.
23)
• Keep the bassinet with the clips and leg mounts facing up (Fig. 23a). Pull the flaps of
the fabric over the bar housing as shown in the diagram (Fig. 23b).
NOTE:
Ensure that the fabric opening wraps completely around the bar housing.
• Use the the hook and loop fasteners to close the flap (Fig. 23c). Repeat on the
opposite side.
24)
• To insert the Rock-A-Bye Bassinet Bars: Open the 4 foot extensions on both Bars
(Fig. 24a).
• Before inserting them into the housing check that the foot extensions all point
inward as seen in the diagram (Fig. 24b).
• Insert the Bars into the housing by aligning the push pin with the hole (Fig. 24c).
Ensure that the pins click into position (Fig. 24d).
NOTE:
Look closely at the pin hole to be sure the push pin has completely come out
of the hole. Repeat for all 4 connection points.
• Rotate the entire Rock-A-Bye and stand it on the foot extensions (Fig. 24e).
Fig. 23a
Fig. 23b
Fig. 23c
Fig. 24a
Fig. 24b
Fig. 24c
Fig. 24d
" Click "
Fig. 24e
