31
32
ASSEMBLY
ASSEMBLY
Copyright © 2022, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados.
Copyright © 2022, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados.
27)
•
To open the canopy:
push forward on the front edge of the canopy while holding
the rear of canopy in place (Fig. 27a).
•
To fold the canopy:
pull backwards on the front edge (Fig. 27b).
Fig. 27a
Fig. 27b
ROCKER FUNCTION
28)
• Turn the bassinet over and close the 4 peg legs (Fig. 28a). Set Bassinet on a flat
surface (Fig. 28b).
NOTE:
Rocking requires adult assistance and supervision, this is not an automatic
rocking cradle (Fig. 28c).
NEVER
use Bassinet on raised surface such as Table, Bed or
Chair. A fall can occur.
Fig. 28a
Fig. 28b
Fig. 28c
Manually Rock The Bassinet
TO SECURE THE ROCK-A-BYE BASSINET TO THE PLAYARD
IMPORTANT!
When the Rock-A-Bye Bassinet is on the
upper position, it must be secured to the playard frame by
using the snap buttons, straps, or fasteners provided.
29)
•
Locate the 4 clip fasteners on the bottom of
the Rock-A-Bye Bassinet (Fig. 29a).
• To attach the Rock-A-Bye Bassinet to the
Playard, lower it into the full-size bassinet.
Push down on the 4 clips and secure it onto
the full-size bassinet railing (Fig. 29b). Secure
the two snaps on the strap down onto the
Playard (Fig. 29c).
ATTENTION:
Playard and full-size bassinet
must be fully assembled and securely locked
before installing or using the Portable Rock-a-
Bye bassinet feature. (See To Assemble Playard
and full-size bassinet sections.
• Reverse the step above to remove the Rock-A-
Bye Bassinet.
Fig. 29b
Fig. 29a
Fig. 29c
