Set Range
: This allows you to set the range which corresponds to 100% ice level rise. For TSU-Models this range
is typically 117mm, to TSU-ML models this is typically 92mm. This menu can only be accessed after dialing the
access code 2220 preventing unwanted change of settings. (During initial start up the access code is not asked
for.)
Rotate the black button to select 2, press to confirm. Press 2 more times to confrim next 2 digits. Dial then to
select 0 and press to confirm. You have now entered access code 2220.
For standard TSU-M models the range setting is 117mm. For TSU-ML models (low height) the range setting is
92mm. Dial the correct setting for the model at hand by rotating the black knob. Confirm your selection by pressing
the black knob.
Rotate the black button to dial 7 and press to conirm. The display indicates 'Range successfully changed'. In case
the button is pressed without dialing 7, you return to the previous menu.
Service Menu
: This menu allows to do additional factory settings which are not accessible by the standard user. If
you enter the menu you get the following screen. Keep pressing the black button to exit. You can only enter with
the correct code.
Software Version
: Press black button to see which software version is installed on the controller.
W W W . B A L T I M O R E A I R C O I L . E U
18
