H25-IR PRO Instruction Manual
Menu System Overview
P/N: 3015-5678 Rev 6
27
The BASIC SETUP screen contains the following key elements:
•
Menu identifier located in the banner line (BASIC SETUP in this example)
•
Right arrows in the banner line indicate another menu to the right (use the right arrow key to access)
•
GAS TYPE menu item (selects the type of refrigerant gas you are checking)
•
UNIT DISPLAY menu item (selects your preference for gas leak rate from a list of standard units)
•
ALARM SETPOINT menu item (used to define the gas leak rate setpoint above which an alarm sounds)
•
DISPLAY STYLE menu item (selects your preference of graphic or numeric display for the SEARCH MODE screen)
•
Command options in the footer line (in this case, the keys to press to select and edit menu items)
To select an item from the BASIC SETUP, scroll through the menu using the Up and Down Arrow buttons until the desired
menu item is highlighted and then press the ENT button to select the item for possible editing.
NOTE:
The right arrows in the header of the BASIC SETUP screen indicate the existence of an additional “tabbed”
menu to the right (and the key to press in order to access it).
3.8. Advanced Setup Screen
The Advanced Setup screen contains configuration options that allow you to take advantage of some of the more complex or
infrequently-used features of the H25-IR PRO. To access the Advanced Setup screen from the Search Mode screen or Measure
Mode screen, press the SETUP button once to reach the Basic Setup menu, then press the SETUP button a second time (as
the Right Arrow button).
The Advanced Setup screen contains more menu items than will fit on the front panel display, so small up and down arrows
on the far right side of the menu items indicate additional menu items. Use the Up and Down Arrow buttons on the front
panel to scroll through the list of menu items. All of the menu items from the Advanced Setup screen are shown in the two
images of Figure 3-12. Note the arrows indicating additional menu items in the scrollable list.
Figure 3-12. Advanced Setup Screen
The Advanced Setup screen contains the following options.
•
User Setups 1-4 (optional user-based pre-sets)
•
Relay Settings (conditional controls for the four output relays)
•
Measurement Log
•
Date/Time Set
•
Log Limit (an upper limit logged leak rate value, above which one or more output relays can be activated)
•
Loop Factor (current loop scaling for the 4-20mA output)
•
Serial Data (None, Text Packet, or Text Only option for RS-232 communications)
•
Probe Button (Only present if Smart Probe is not auto-detected. Selects function of button on standard probe.)
•
Menu identifier located in the banner line (Advanced Setup in this example)
•
Right arrows in the banner line indicate another menu to the right (use the Right Arrow button to access)
•
Left arrows in the banner line indicate another menu to the left (use the Left Arrow button to access)
•
Command options in the footer line (in this case, the keys to press to select and edit menu items)
<<
ADVANCED SETUP
>>
USER SETUPS 1-4
RELAY SETTINGS
MEASUREMENT LOG
DATE/TIME SET
LOG LIMIT
¯
qp
SELECT
± EDIT
<<
ADVANCED SETUP
>>
DATE/TIME SET
LOG LIMIT
LOOP FACTOR
SERIAL DATA
PROBE BUTTON
qp
SELECT
± EDIT
Summary of Contents for H25-IR PRO
