Bacharach HGM-MZ Product Bulletin Download

Page: 4 / 4

PRODUCT BULLETIN

Once all of the alarms associated with a given MZ monitor are acknowledged, its

red LED

will

turn off, and any external alarms connected to the MZ relays will deactivate. All pending alarms

across the entire network must be acknowledged before the Remote Display returns to normal

operation. Once that occurs, its

red LED

will turn off, and any associated external alarms

connected to the RD relays will deactivate.

Keep in mind that the system will continue to generate new alarms if PPM values above the
alarm thresholds are detected.

Summary of Contents for HGM-MZ

Page 1: ...nly shows during an unattended time or at night You would never know you had a leak unless you made a habit of checking the alarm log history regularly Changing the Alarm Acknowledge Mode This functio...

Page 2: ...e Alarm Summary Screen displays a list of all alarm conditions pending across the network The screen is divided into 8 boxes and each box represents a single alarm If more than eight alarms are pendin...

Page 3: ...ACK Use the left arrow key to acknowledge the alarm as described in the next section Acknowledge the alarm by pressing the left arrow key twice Acknowledging Alarms Each pending alarm requires acknowl...

Page 4: ...and any external alarms connected to the MZ relays will deactivate All pending alarms across the entire network must be acknowledged before the Remote Display returns to normal operation Once that oc...