7
B ) Device label
Here you can enter a name with which to label the power strip. You can view
this value via SNMP.
C ) Host name
This is where the DNS host name of the power strip is confi gured.
D ) Network confi guration > Enable
The network functionality of the power strip can be disabled here. PLEASE
NOTE: To restore the power strip's network functionality, access is required via
the serial interface.
E ) Method
Here you can select either static or dynamic (DHCP) IP address allocation.
F ) IP address
The static IP address is entered here.
Summary of Contents for BlueNet BN2000
Page 1: ...Manual BlueNet BN2000...