19.
Enter an IP address in the text box (Fig. 59/
Ⓑ
) and use the
‘Add’
Ⓒ
) to add it to the list (Fig. 59/
Ⓐ
).
20.
After completing the entry, close the window using the
‘Save’
Ⓓ
).
21.
Confirm the entry by clicking the
‘Continue’
Ⓖ
).
22.
If required, click the
‘Activate SMTP’
Ⓐ
)
and enter a server address, a port and a sender’s e-mail
address.
23.
If required, activate the
‘Authentication’
Ⓑ
) and define a user and password.
24.
Confirm the entries by clicking the
‘Continue’
Ⓒ
).
25.
If required, click the
‘Activate NTP’
Ⓐ
),
enter a server address (Fig. 61/
Ⓑ
) in the
‘Server 1’
field and
Ⓒ
). If necessary, enter additional
server addresses in the
‘Server 2’
Ⓒ
) and
‘Server 3’
Ⓓ
) fields.
Alternatively, do not click the
‘Activate NTP’
checkbox
Ⓐ
) and only enter the date and time (Fig. 61/
Ⓕ
).
26.
Confirm the entries by clicking the
‘Continue’
Ⓒ
).
Fig. 59: “IP addresses” window
Configuring the SMTP settings
Fig. 60: “SMTP settings” window
Configuring the NTP settings
Fig. 61: “NTP settings” window
Putting the PDU into operation
Configuring the PDU via the web interface (as of software version V1.01.XX)
25.09.2015
BlueNet PDU BN3000/3500/5000/7000/7500
37
