D-BA-0000304.14.5
Device configuration, system description Operating
instructions
OI-14
V05 / September 07, 2010
3.2.2.4 Ethernet RJ45 (10/100Base-T)
The device is equipped with two 10/100Mbit Ethernet connections. The ETH I
connection can also be used to boot from a PXE server using PXE V2.0.
RJ45
Pin
Signal Description
1
TxD+
Transmit Data +
2
TxD-
Transmit Data -
3
RxD+
Receive Data +
4
5
n. c.
not connected
6
RxD-
Receive Data -
7
8
n. c.
not connected
Tab. 6: Pin assignment for Ethernet socket
LED Status
Description
On
Connected to the 100Mbit network
Yello
w
Off
Connected to the 10Mbit network or offline
On
Network connection established (active link)
Flashing
Data are sent or received.
Gree
n
Off
Not connected to the network or offline
Tab. 7: Overview of status LEDs of the Ethernet interface