Back Doctor Pinnacle A70 series Setup Manual Download

Page: 1 / 5

Pinnacle / A70 Series Setup Guide

Instructions on how to setup your Massage Chair.

1.

Open the box.

The chair will be in the reclined position in the box. Plug the power cord into the
chair while it is still in the box.

Turn the power switch on the chair to the ‘on’ position

Use the remote control to recline the chair back to the upright position

Now you can wheel the chair from the carton to where you would like the massage
chair in your home. Example shown below on how to move chair.

6. Rest the side panel to the side of the chair.

Summary of Contents for Pinnacle A70 series

Page 1: ...cord into the chair while it is still in the box 3 Turn the power switch on the chair to the on position 4 Use the remote control to recline the chair back to the upright position 5 Now you can wheel the chair from the carton to where you would like the massage chair in your home Example shown below on how to move chair 6 Rest the side panel to the side of the chair ...

Page 2: ...ct the wires coming out from the chair to the wires on the side panel These will be colour coded or labelled A B C etc 9 There will be four white plastic mounting lugs that will go into the frame of the chair Line these up and put the side panel in place Pinnacle A70 Series Setup Guide ...

Page 3: ... packet of bolts and washers Use the bolt swith the with the allen key heads The hole locations for the bolts are on the inside of the panel show below 11 Insert the front bolt and tighten with the allen key that is provided Pinnacle A70 Series Setup Guide ...

Page 4: ...rt the rear bolt and tighten with allen key provided 13 Now follow the same steps to attach the other side panel 14 Now locate the small box that contains the shoulder massagers Pinnacle A70 Series Setup Guide ...