PANELS-TO-RAILS
BACK 40
SOLAR
We will be using END clamps (G) to
secure the ends of the panels and
MID clamps (H) to secure and attach
adjoining panels. Both types consists
of the clamp, a bolt, and a T-nut.
These can be loosely assembled, and
the nuts can be inserted into the
channel lengthwise of the Panel Rails
from the ends or in the middle. The
T-nut locks in place perpendicularly
to the channel as tightened.
END Clamp
MID Clamp
G
H
Start with setting
one panel on the
rails and using
two END clamps
and secure the
first panel near
the end of the
rails by tightening
the bolts with a
hex wrench.
Add the second panel and secure
it with the first panel using a MID
clamp.
Continue adding one panel at a
time until all panels are secured.
Finish by adding the last two END
clamps. Tighten all bolts.
Spec: 4 ft-lbs