MCU (WinVision1875 Main Control Unit)
DVI signal from PC becomes original video signal into WinVision1875.
Video output comprises of upper 8 ports and lower 8 ports
(upper and lower ports are carrying same signals.)
The UTP cable into
WinVision1875
can be extended up to 20M maximum.
●RS232C
RS-232C cable (cross) is connected to the PC for internal setting of MCU
●MONITOR
DVI-In signal converted to analog signal output for MONITOR
●DVI IN
Digital Video Input signal
Input Signal
・DVI
Control Signal
・RS-232C(crossed cable)
Outer Dimension
・(W)430mm×(H)87mm×(D)290mm(Including Extrusion)
Output
・8Ports×2(Matrix configuration)
Input Power
・ACIN 90V-240V
Auxiliary cable
・DVI×1、VGA×1、RS232C(cross)×1、power×1
Start up procedure ( MCU is recognized as Plug & Play Monitor)
-Turn on the MCU.
-Turn on the PC.
(Check the DVI cable connection between PC and MCU, WinVision can be connected later.)
MCU (WinVision1875 Main Control Unit)
Summary of Contents for Winvision1875
