Diagram
Diagram
Instructions
With a pen, make a mark on the
string directly below the clock as
indicated by the arrow.
StEp 6
Instructions
Place slight pressure with your
fi nger on the string loop hanging
below the clock and press the [DEC]
button. - this will release the string.
Release enough string so that your
fi nger is 3cm below the door handle.
StEp 5
Diagram
Diagram
Instructions
Now unlatch the door, attach
the string loop to the door
handle and press the [ADD]
button and this will raise the
door to it’s open position.
StEp 8
Instructions
Again, place slight pressure with your
fi nger on the string loop and press
[DEC] and release approximately
another 20cm of string. Now make
three knots on top of each other.
StEp 7
3cm
Pen mark,
make knot
here
20cm
WARNING: If the knot is
too small, the device may
snap the string which
will require the unit to be
returned for repair at a cost
of $35 + postage.
The knots are used to stop
the motor at that point.
Without the knots, the
motor will keep pulling and
cause internal problems.
I Can’t Wait
To Try It Out!
1/2 of
the way!
3/4 of
the way!
Need some help?
Contact the Backyard Chicken Coops team for advice on
1300 763 133
or sales@backyardchickencoops.com.au
3
