INSTRUCTION MANUAL: SKU#273-0843 STEEL BENCH WITH FOLDABLE TABLE
CAUTION:
Read all instructions before assembly. Failure to do so may result in faulty assembly and potential
injury.
Important information:
1.
To put the bench together it is recommended that you have one other person help you.
2.
Assemble on a soft, non-abrasive surface, such as carpet or cardboard to avoid damaging the item.
3.
Please don’t tighten the bolts too tightly. Fasten nuts and washer to bolt by hand initially. After all parts have
been
put together go back and tighten each nut on each bolt to completed installation.
4.
For a more satisfying appearance please install with bolt head on the outside of bench parts with the thread on the
inside parts.
5.
It is recommended to store the bench under critical weather and use an outdoor cover (sold separately) to extend
the life of the product.
6.
For safety, we recommend that you check the bolts regularly and tighten them.
7.
The product contains small parts, please keep children away when installing.
Noted:
Identify all parts packed in carton against the parts list. Remove all the protective material carefully and DO NOT
use a knife to prevent scratching the surfaces. USE ONLY ON LEVEL SURFACES. INSPECT VISUALLY BEFORE EACH USE
AND ENSURE ALL HARDWARE IS PROPERLY TIGHTENED.
CUSTOMER SERVICE:
For questions, assistance or repair parts, please call toll free at:
1-800-505-8305
(M-F 9:00am-
5:00pm Eastern Time) or visit us on the web
www.americancustomerservice.com
PARTS LIST
REF.
PARTS
NAME
IMAGE
QTY
A
Armrest
2
B
Seat
1
C
Backrest
1
D
Short Bolt
4
E
Long Bolt
4
F
Washer
16
G
Nut
8
