NOTE:
TAKE NOTE OF SLIDE BED SURFACE FINISH, THE DULL SIDE WILL BE TOWARDS THE
GROUND. PLACE SLIDE BRACE CENTERED ON THE BOTTOM (DULL SIDE) AND 1/2"
FROM THE EDGE. USE
M70
BOARD AS A TEMPLATE FOR DRILLING BOTTOM HOLE
PATTERN IN SLIDE BED. USE A 5/16" DRILL BIT.
TOP
BOTTOM
TIP:
PRE-BENDING THE ENDS WILL EASE ASSEMBLY. PLACING THE
SLIDE BED OUT IN THE SUN MAKES IT EASIER TO BEND.
BOLT WH 5/16x1/2
(3 PLCS)
1/2 in [13 mm]
M70 - SLIDE SUPPORT BOARD - W100935
5/8"x3 3/8"x19 7/8" (16x86x505)
(1)
SLIDE BED 10' LIGHT GREEN
(x1)
10 FOOT SLIDE ASSEMBLY
T-NUT 5/16
(3 PLCS)
SLIDE BED 10' LIGHT GREEN
-
A100035
(1)
M70
(1 PLCS)
STEP 1
T-NUT 5/16
(3)
BOLT WH 5/16x1/2
(3)
35
