PLACE (1) SLIDE RAIL ASSEMBLY ON A FLAT SURFACE AND BEGIN INSERTING SLIDE BED AT THE BOTTOM OF
THE SLIDE RAIL (FIGURE 1). HAVE A HELPER BEND THE SLIDE BED TOWARDS THE TOP OF THE SLIDE AND
INSERT THE BED INTO THE SLIDE CAVITY. MAKE SURE SLIDE BED IS COMPLETELY DOWN IN THE SLIDE CAVITY.
INSERT THE (2)
M78
CENTER SLIDE BRACES INTO THEIR RESPECTIVE PILOT LOCATIONS (FIGURE 2).
STEP 3
SLIDE ASSEMBLY
B
O
T
T
O
M
FIGURE 1
FIGURE 2
NOTE:
A HELPER IS RECOMMENDED FOR THESE
FOLLOWING STEPS.
TIP:
CENTER SLIDE BRACE - W4L15703
5/8"x3 3/8"x14 1/4" (16x86x362)
M78
(x2)
M78
(x2)
SLIDE BED ASSEMBLY
SLIDE RAIL ASSEMBLY
START HERE
VIEWING WINDOW
47
