09/09/2011
- BEFORE YOU BEGIN -
Includes 10’x8’ (305x244 cm), 10’x12’ (305x366 cm),
10’x16’ (305x488 cm) Building Instructions
We manufacture kits from select construction grade lumber and engineered wood products. Construction grade lumber,
a product cut from trees, has many natural characteristics and blemishes that may be present in some of the pieces
you receive in your kit. Natural characteristics and blemishes in construction lumber may include knots, torn wood grain
along edges, minor cracks/splits, twists, limited bark along edges and pitch pockets that may exude sap. Be assured that
the individual parts have been cut and inspected to remove as many of the wood’s natural, less appealing characteristics
as possible. These characteristics and/or blemishes will not affect the strength, durability, or structural integrity of the
fi
nished product. Generally, the exterior trim parts selected for your kit are graded from only one side and should be
installed with the most attractive side outward. Our limited warranty does not cover the natural characteristics and
blemishes that occur with construction grade lumber products.
Base
Building/Edi
fi
cios
10’x8’
(305x244 cm)
Base
+2 Extend-
ers/Extensiones
10’x16’
(305x488 cm)
16602-T
Instrucciones para edi
fi
cios de
10’x8’ (305x244 cm),
10’x12’ (305x366 cm), 10’x16’ (305x488 cm)
Base
+1 Extend-
ers/Extensiones
10’x12’
(305x366 cm)
10’ Wide Gambrel
Premier / Heritage Series
Cubierta a la holandesa de 10’
First...
●
Check with your local building authority before erecting.
●
Read instructions thoroughly before you begin.
Building Codes
●
Our buildings are designed to meet most local and national
U.S. codes and are not meant to be used for living space.
●
General construction drawings can be provided.
●
Stamped certi
fi
ed drawings can be provided for a fee.
Call for details.
Check All Parts
●
If a part is missing, circle the part in question and call.
●
Please note the primer color may vary on siding and
trim parts. This is a factory applied primer intended for
preparing your building for painting. This is NOT a
fi
nish
coat. This primer color variation will not affect the look
of
your building once painted.
Important
●
Lumber is graded from one side, use most attractive
face to the outside.
●
In a drawing, a dotted line represents a part hidden
from
view (like a part under a panel).
Assistance required
●
Assistance is necessary to handle,
fi
t, and secure
some components.
Squareness is very Important!
●
Keep 90° corners and 90° perpendiculars throughout
the assembly to ensure all components
fi
t together.
Check foundation size
●
Before starting on your foundation, make sure you are
building the correct size foundation for your building.
Always wear OSHA-APPROVED safety
glasses throughout assembly process.
- ANTES DE EMPEZAR -
Customer Service
(Servicio al cliente)
1-888-827-9056
1000 Ternes Drive
Monroe, MI 48162
Primero...
●
Consulte la autoridad de construcción local antes de con-
struir el edi
fi
cio.
●
Lea las instrucciones completamente antes de empezar.
Códigos de Construcción
●
Hemos diseñado nuestros edi
fi
cios a que conformen con
todos los códigos de construcción locales y nacionales. Los
edi
fi
cios no están proyectados como residencia.
●
Se disponen planes generales de construcción.
●
Se disponen de planes certi
fi
cados por un precio. Es-
tos planes no garantizan la aprobación de los autoridades
locales.
Compruebe todas las piezas
●
Si falta una pieza, indícala con un círculo y llámenos.
●
Aviso: El color del imprimador puede variar en la covertura
y las partes de la moldura. Este imprimador se aplica en la
fábrica y es para preparar su edi
fi
cio para pintar. NO es una
capa de pintura terminada. La variación en el color del impri-
mador no afectará la apariencia de su edi
fi
cio al pintarlo.
Importante
●
La Madera está elaborada en un solo lado. Use el lado más
atractivo en el exterior.
●
Si falta una pieza, póngale un círculo y llámenos.
●
En un dibujo una línea punteada representa una pieza no
vista (por ejemplo, una pieza debajo de un panel)
Ayuda requerido
●
Seleccione un sitio nivelado.
●
Será necesario pedir ayuda para manejar, unir, y reforzar
algunas piezas.
¡Es preciso escuadrar el edi
fi
cio!
●
Mantenga ángulos de 90° en las esquinas y los perpen-
diculares durante la construcción para asegurar que todas
las piezas se unen correctamente.
Comprueba las dimensiones de la
cimentación.
●
Compruebe que las dimensiones de la cimentación son las
correctas para el edi
fi
cio.
Siempre lleve gafas de seguridad aproba-
das por OSHA durante la construcción.
Fabricamos nuestros equipos de madera elaborada y de productos maquinados de madera. La madera elab-
orada, producto de árboles, tiene muchas características e imperfecciones naturales que puedan tener algunas
piezas contenidas en el equipo. Estas imperfecciones y características pueden incluir nudos, grano rasgado
sobre el borde, rajas/grietas pequeñas, torsiones, cortezas en el borde, y bolsos que exuden savia. Asegurams
que hemos cortado e inspeccionado las partes individuales para eliminar las características naturales menos
atractivas posibles. Estas características y/o imperfecciones no afectarán la fuerza, durabilidad ni la integridad
estructural del producto
fi
nal. Po lo general, las piezas de moldura exterior seleccionadas para su equipo se
elaboran de un solo lado y deben ser instaladas con la parte más atractiva por fuera. Nuestra garantía limitada
no cubre las características e impefecciones que ocurren con los productos de madera elaborada.
Tools required
(Herramientas
necesarias)
❑
Hammer
(Martillo)
❑
Phillips Screw-
driver
(Desarmador cruz)
❑
Level
(Nivel)
❑
Ladder
(Escalera)
❑
Pencil
(Lápiz)
❑
Tape Measure
(Cinta métrica)
❑
Utility Knife
(Navaja)
❑
Paint Tools
(Herramientas
para pintar)
❑
Caulk Gun
(Pistola para masil-
lado)
❑
Hand Saw
(Sierra portátil)
❑
Wood Glue
(Pegamento para
madera)
Optional Tools
(Herramientas
opcionales)
Electric Drill w/ #2
Phillips Tip
(Taladro eléctrico
Broca “Phillips”)
❑
Chalk Line
(Línea de marcar)
❑
Square
(Escuadra)
❑
Nail Pouch
(Bolsillo para
clavos)