SLIDE ASSEMBLY
STEP 4
PLACE SECOND SLIDE RAIL ASSEMBLY OVER THE TOP OF THE SLIDE BED AND SLIDE SUPPORT
TUBES. INSERT THE SLIDE BED AND SLIDE SUPPORT TUBES INTO THE SLIDE CAVITY.
MAKE SURE SLIDE BED IS INSERTED WITHIN 1/8" (3mm) OF GROOVE BOTTOM.
SLIDE RAIL ASSEMBLY
SLIDE RAIL ASSEMBLY
NOTE:
USE A RUBBER MALLET TO FULLY SEAT
THE SLIDE BED INTO THE SLIDE CAVITY.
TIP:
FAILURE TO INSERT SLIDE BED PROPERLY MAY RESULT IN
INJURY OR AMPUTATION. EXPOSED SLIDE EDGES CAN BE SHARP AND BECOME
A LACERATION HAZARD IF THE SLIDE IS NOT PROPERLY ASSEMBLED.
48
