Backyard Expressions 909939, Assembly Instructions Manual

To Care for the Cooler: 

Leaving the cooler in prolonged sunlight or rain will weather the wood.
Reseal the wood surface every six months or as needed. 
Please use water or mild detergent and soft cloth to clean the inner compartment.
 Do not scratch or scour
It is recommended to store your cooler box in a dry place.

Our wooden coolers with either galvanized steel or plastic polyurethane lining can be cleaned
using a solution of mild soap and warm water. Be sure to rinse with hot soapy water and drain
completely. If there is a tough stain, use baking soda and water to remove. Remove odors with a
diluted solution of chlorine bleach and water. If an odor persists, wipe interior with a cloth
saturated with vanilla extract, then leave the cloth in the cooler overnight. We know it sounds
far-fetched, but it really does work. Always air dry with the lid open before storing.  During
long periods of non-use, store furniture in covered and dry place. For the least maintenance, use
under covered area.

The cooler may be prone to tipping over during high winds.  Please take necessary precautions to
prevent tipping.

page 5

Step 5: 

 Before using the cooler, please secure the drain to the bottom hole of the cooler body.

Please note: the 2 washers on the drain should be put on in the following manner -- one is above the
drain on the bottom hole, and the other is below the drain. Finally insert and attach the drain to
the cooler.  Remember to tighten the drain valve on the underside of the cooler body to prevent
leaking.  Please note, at times, condensation may occur on the bottom of the cooler.