IV.
To open the spa cover:
1.
From the front of the spa, not the side, lift the front half of
the cover to break the seal and push it straight back until it
stops.
2.
Fold the front half of the spa cover back onto the rear half
of the cover.
3.
Lift the spa cover into the full open position.
4.
For safety purposes insert the locking pin as shown to
prevent accidental closure.
.
V
To close spa cover:
in, close the cover, and unfold it. Pull
Remove the locking p
the cover into full close position from the front of the spa.
Page 3
