shopbackyardpro.com
24
|
Operation
SHUT DOWN INSTRUCTIONS
WARNING!
•
NEVER move your pellet grill while it is hot or in use.
•
Make sure the flame tamer and grease tray are properly installed. If not properly installed, a grease fire could result.
•
Adjust the chimney cap height for added temperature control. Upward decreases the temperature and downward
increases. DO NOT COMPLETELY CLOSE CHIMNEY CAP.
•
Use caution around the grill. All surfaces could become VERY HOT and may cause burns if touched.
•
In SMOKE MODE, for temperatures above 250°F, the grill may not produce smoke.
1.
After you have finished using the grill, press the POWER button to turn OFF the grill. This will set the grill into SHUTDOWN MODE.
2.
In SHUT DOWN MODE the auger will stop feeding pellets into the fire pot and allow the flames to burn out naturally. During this
time, the combustion/cooling fan will continue to run until a preset internal temperature is reached. When the procedure is
complete, the fan and power will turn off automatically.
3.
It is important that you DO NOT unplug the grill until this cycle is complete.
4.
The procedure will take about 15 minutes. After it has turned off and properly cooled, disconnect the power cord and properly
store the smoker in a safe, dry place away from children and pets.
5.
ALWAYS leave the grill unplugged from the electrical outlet when not in use.
WIRELESS CONNECTION
1.
Download and install the PTC app from the App Store or Google Play on your smartphone.
2.
Create an account in the PTC app using an email or phone number.
A verification code will be sent to activate the app for use, and is only required for the initial setup.
3.
Connect to the PTC controller by enabling your phone's Bluetooth®, powering on the PTC controller on the grill,
and opening the PTC app on your phone.
4.
Choose "Add Device" then select the PTC Grill shown in the list.
5.
Once connected, the wireless connection indicator LED on the controller will remain illuminated.
6.
The device name should now be shown in the device list.
7.
Press and slide left to reveal device options, where the device name can be changed or the device removed
from the connection list.
8.
To use the grill, select a cooking mode. To set a cooking temperature, tap the temperature shown to the right of
GRILL TEMP SET and select the desired temperature.
COOKING MODE DEFAULTS:
SMOKE: 180°F
GRILL: 350°F
HIGH: 600°F
9.
To set an alarm for the meat probe, tap the temperature shown to the right of PROBE TEMP SET and select the
desired temperature. Once that temperature is reached, you will be notified.
10.
You can create a cooking profile that will adjust the cooking temperature and time for up to 3 cooking periods.
To set the cooking profile, tap PROFILE shown to the right of GRILL PROFILE SET. Then enter the desired cooking
temperature and time for each period. Upon leaving this screen, the cooking profile will start.
11.
You can set an alarm in the app that will display a message, give audible feedback, as well as vibrate when a
selected time is reached. These notifications can be adjusted in the SETTINGS menu.
12.
At any time during operation, you can view a simple temperature curve chart to monitor performance.
13.
To enter SHUTDOWN MODE and power off the grill, simply press the power button icon.
You can connect your phone to the grill's controller using Bluetooth® wireless technology.
