24
2" (5,1 cm)
PARTS REQUIRED:
x17
BACKWALL INSTALLATION
Set back wall on side wall top plates and secure using two 3"
screws on each side
(Fig.A)
.
1
Nail lower edge of panel to oor frame using 2" nails 6" apart.
Angle nail to hit oor frame
(Fig. B)
.
2
Secure back wall plate to oor using two 3" screws between
each stud.
3
5
You have finished standing your back wall.
FINISH
Nail 2" nails rst.
Angle to nail into
oor frame.
2" (5,1 cm)
Nails
Fig. B
Fig. A
4
x24
1-1/2" (3,8 cm)
Nail back wall panel to side wall stud using thirteen 1-1/2"
nails 6" apart.
It is important to secure the
side wall in the following order:
BEGIN
(2) 3" (7,6 cm)
Screws
Flush
x4
3" (7,6 cm)
x8
3" (7,6 cm)
6"
(15,2 cm)
6"
(15,2 cm)
3"
(7,6 cm)
Nails