Flush
(1) Nail per side through weather seal.
49
SHINGLES - RIDGE CAP
• You will finish off the top of the roof with a ridge cap made from shingles.
Note:
• You will need about 20 - 22 cut pieces.
Cut shingles into THREE pieces.
Hint:
Use cut-off pieces first.
Score shingle,
then snap-off angled cut.
Install first ridge cap flush to shingles at front, as shown.
Install second ridge cap 5" back, as shown.
2
3
BEGIN
1
2"
(5,1 cm)
2"
(5,1 cm)
2"
(5,1 cm)
2"
(5,1 cm)
2"
(5,1 cm)
2"
(5,1 cm)
Top of slot.
Weather Seal
(1) Nail per side through weather seal.
5"
12,7 cm
FRONT OF
SHED
FRONT OF
SHED
Flush
20 to 22
Pieces
