43
DOOR
Move to the opposite end. Using the long
edge of the panel as a lever move the
panel side-to-side until the top corner is
ush to the peak
(Fig. C)
and there is 3/4"
measurement to the rafter
(Fig. D)
.
You may need to move your rafter to get
the 3/4" measurement. Secure panel with
two 2" nails in the corners.
2
You must square the roof by attaching one panel st. You will use the panels’ long
edge as a lever to bring your roof into square. Commonly known as “racking”.
Roof panels may cause serious injury
until securely fastened.
Attach the
48 x 96"
panel with the rough
side up (painted-grid lines side) with a 3/4"
measurement on the rafter
(Fig A)
and the
panel ush at the peak
(Fig. B)
.
Secure panel with two 2" nails in
the corners.
1
BEGIN
2" (5 cm) x4
PARTS REQUIRED:
ROOF PANELS
3/4"
GAUGE BLOCK
GAA
7/16 x 11-1/4 x 96"
(1,1 x 28,6 x 244 cm)
x2
7/16 x 48 x 96"
(1,1 x 122 x 244 cm)
x2
Flush at peak.
Fig. C
Two Nails
48"
(122 cm)
3/4"
(1,9 cm)
Fig. A
Gauge
Block
Gauge
Block
Flush at peak.
Fig. B
3/4"
(1,9 cm)
Gauge
Block
Fig. D
7/16 x 25-3/4 x 48"
(1,1 x 65,4 x 122 cm)
x2
7/16 x 11-1/4 x 25-3/4"
(1,1 x 29 x 65,4 cm)
x2
Summary of Contents for Handy Home MAJESTIC 8' x 12'
Page 1: ... NN ...
